QM INDUSTRIES QMMC11J203SEC Cartridge Unit Bearings

d2:50 mm; Pu:21.710 kN; rs (min):2 mm; D:110 mm; B:40 mm; Static (Coa):178 kN; F:65 mm; E:mm; b:mm; r1s (min):2 mm;

Calculation factor kr:0.03; d:3 mm; ra max.:0.15 mm; d2 ≈:4.35 mm; D2 ≈:7.98 mm; Limiting speed:90000 r/min; da min.:3.9 mm; Basic static load rating C0:0.11 kN; Basic dynamic load rating C:0.358 kN; Da max.:8.8 mm;

Grease Speed Rating n1:6000 rpm; D:100.0000 mm; d:55.000 mm; B:21.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:37500 N; Basic Dynamic Radial Load Rating C:48800 N; Oil Speed Rating n2:7800 rpm;

Lw:27.8 mm; r1,2 min.:0.3 mm; Dw:4 mm; r2 max.:1 mm; Mass needle roller:2.74 g; r1 max.:0.8 mm;

d:80.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:159000 N; B:39.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:13000 rpm; Grease Speed Rating n1:8700 rpm; Basic Static Radial Load Rating Co:129000 N; D:170.0000 mm;

Fatigue load limit Pu:3.6 kN; Db:18.4 mm; Reference speed:20000 r/min; Basic dynamic load rating C:20.9 kN; da:23.6 mm; C:24 mm; Mass bearing:0.069 kg; Fw:18 mm; Da:24.5 mm; Limiting speed:24000 r/min;

K:3 mm; Calculation factor Y0:2.8; Fatigue load limit Pu:11.8 kN; ra max.:1 mm; d3:70 mm; Ba min.:2 mm; Basic dynamic load rating C:107 kN; Basic static load rating C0:108 kN; Calculation factor Y2:4.2; r1,2 min.:1.1 mm;

P150°:48 kN; Da:180 mm; Bearing:23024 CCK/W33; A1:111.125 mm; PG:1/4 NPT; A2:155.575 mm; Ca:55.804 mm; RG:3/8 NPT; P120°:52.5 kN; Adapter sleeve assembly:SNW 3024x4.1/8;

α:9 °; Basic static load rating C0:51 kN; l7 min.:24 mm; B:16 mm; Basic dynamic load rating C:83 kN; G:M 20x1.5; Specific dynamic load factor K:300 N/mm²; l1 min.:43 mm; h:78 mm; d2 max.:54 mm;

D2:49.57 mm; Preload class D GD:720 N; Calculation factor e:0.68; Static axial stiffness, preload class C:133 N/µm; Attainable speed for grease lubrication:28000 r/min; Calculation factor (single, tandem) Y2:0.87; Db max.:53 mm; Da max.:50.4 mm; Basic static load rating C0:7.65 kN; r3,4 min.:0

Cap bolt:4 x 3/4-10 UNC; R2:37.306 mm; N1:28.575 mm; End plug (suffix Y):EPR 27; Eye bolt:2 x 3/8-16 UNC; J1:107.95 mm; Cap bolt, SAE grade:5; H2:69.85 mm; S:4.763 mm; Taconite seal:TER 123;

Calculation factor e:0.33; D1 ≈:1050 mm; r1,2 min.:4.8 mm; T:844.55 mm; Fatigue load limit Pu:4400 kN; Thrust factor K:1.76; Basic dynamic load rating C:23800 kN; r3,4 min.:12.7 mm; d:863.6 mm; B:844.55 mm;

Basic Dynamic Radial Load Rating C:10100 N; Shielded or Sealed B1:12.7 mm; Width Plain B:9.5 mm; Grease Speed Rating Open/Shielded n1:14000 rpm; D:47.6000 mm; Basic Static Radial Load Rating Co:5850 N; Accessories:One Shield; Fillet Radius ra:0.79 mm; Sealed Speed Rating n3:9600 rpm; Oil Speed Ratin

D3:413 mm;   -:0.2 mm; Basic static load rating C0:5000 kN; C:189 mm; b:7.3 mm; Calculation factor kr:0.4; Fatigue load limit Pu:490 kN; d1 ≈:333 mm; D:420 mm; da min.:288 mm;

Oil Speed Rating n2:6000 rpm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:4500 rpm; D:100.0000 mm; Grease Speed Rating n1:4500 rpm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:53000 N; B:42.90 mm; d:45.000 mm; Basic Dynamic Radial Load Rating C:72800 N;