SUMITOMO QT31-20-A Low Pressure Gear Pump

rs (min):4 mm; Grease:4130 kN; with tapered bore:790 min-1; with cylindrical bore:670 min-1; Pu:2370 kN; Oil:345.870 kN; d:260 mm; D:440 mm; Static (Cor):16.7 mm; Dynamic (Cr):9 mm;

ra max.:3 mm; Da max.:201 mm; Basic static load rating C0:80 kN; D1 ≈:183.3 mm; B:73 mm; Calculation factor Y1:1.7; Basic dynamic load rating C:190 kN; Reference speed:5600 r/min; Calculation factor Y2:2.6; d3:130 mm;

Oil Speed Rating Open/Shielded n2:10000 rpm; Grease Speed Rating n1:8500 rpm; Fillet Radius ra:1.00 mm; B:18.00 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Dynamic Radial Load Rating C:30700 N; D:80.0000 mm; Basic Static Radial Load Rating Co:19000 N; Oil Speed Rating n2:10000 rpm; d:40

b1:23.5 mm; Dynamic (Ca):447 kN; D:260 mm; s:2.7 mm; r1s (min):3 mm; d2 (max):170.5 mm; F:154 mm; rs (min):3 mm; B:55 mm; b:14 mm;

C:19 mm; r1s (min):1.5 mm; B:23 mm; rs (min):1.5 mm; a:21 mm; Pu:12.440 kN; r2s (min):0.6 mm; Static (Coa):102 kN; d2:50 mm; T:24.75 mm;

Lock washer:W 44; Mass adapter sleeve assembly:14.5 kg; B:32.004 mm; d1:201.613 mm; Sleeve:S 44x7.15/16; B1:149.631 mm; Lock nut:N 44; d3 max.:279.527 mm; Hydraulic nut:HMVC 44E; G:219.151 mm;

Oil Speed Rating Open/Shielded n2:9500 rpm; Sealed Speed Rating n3:5000 rpm; d:55.000 mm; Basic Dynamic Radial Load Rating C:16500 N; Accessories:One Shield; Basic Static Radial Load Rating Co:14000 N; D:80.0000 mm; Grease Speed Rating Open/Shielded n1:8000 rpm; Fillet Radius ra:1.00 mm; B:13.00 mm;

D:400.0000 mm; Accessories:Shield & Seal; B:65.00 mm; Sealed Speed Rating n3:940 rpm; Basic Static Radial Load Rating Co:375000 N; Basic Dynamic Radial Load Rating C:291000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:1800 rpm; d:260.000 mm; Grease Speed Rating Open/Shielded n1:150

Basic Static Radial Load Rating Co:1470 lbf; Dimension G:0.4375 in; Dimension B:3.6250 in; Dimension S1:0.7188 in; Basic Dynamic Radial Load Rating:2380 lbf; Dimension H:1.0625 in; Dimension D2:2.3750 in; Width A:1.3750 in; Shaft Diameter D:3/4 in; Insert Bearing IB:Stainless Steel;

H1:190.5 mm; Cap bolt recommended tightening torque:1220 N·m; PG:1/4 NPT; Bearing:22236 CCK/W33; J max.:600.075 mm; Appropriate attachment bolt size G:1 in; Adapter sleeve assembly:SNW 36x6.1/2; L:679.45 mm; Ca:95.809 mm; A2:254 mm;

B:104.00 mm; Oil Speed Rating n2:3600 rpm; D:210.0000 mm; Basic Dynamic Radial Load Rating C:307000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2000 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:335000 N; Fillet Radius ra:3.00 mm;